Energy Saving LED Solar Garden Light
  • Seller Yangzhou Jinyuan Lamps Co., Ltd.
  • Min. Order 1 Set/Sets

Item Details

Port: Shanghai
Supply Ability: 5000 Piece/Pieces per Month
Payment Terms: L/C,T/T,Western Union

Product Description

Energy Saving LED Solar Garden Light

A Brief Introduction

Jinyuan Lamps is one of the provincial large-medium sized production, design and engineering companies in the industry of road illumination, with registered capital of USD 8,614 thousand, which is affiliated to Jinshang Electric Group. Jinyuan works with governments and Clients in municipal projects around the world to design, manufacturing and supply.

Jinyuan mainly produces led street light, solar street light, wind solar hybrid street light, light poles and other accessories; please refer to detailed categories on the left.

Clients depend on the expertise of Jinyuan’s 300 employees operating globally to deliver products safely, on schedule, within budget, and with the quality they expect.

LED Light: 20W-60W applicable

Light Source Details click here:

We offer free proposal to each special requirement in SOLAR LIGHT:

- different lamp work time per night

- different solar resource in different regions

- different pole height and pole design

- different LUX or we said brightness requirement

- different quantity

Please contact with us to get reasonble solar street light configuration for your inquiry.

B Solar Panle Parameters

Model Pm(W) Voc(V) Im(A) Open Voc(V) Isc(A) W × L× H Weight(kg)
XHK-5D 5W 17.5 0.29 21.5 0.32 230×276×30 1
XHK-10D 10W 17.5 0.57 21.5 0.65 296×374×30 1.4
XHK-15D 15W 17.5 0.86 21.5 0.97 425×445×30 2
XHK-20D 20W 17.5 1.14 21.5 1.29 425×445×30 2.7
XHK-35D 25W 17.5 1.43 21.5 1.61 426×826×30 3
XHK-30D 30W 17.5 1.71 21.5 1.94 426×826×30 3.5
XHK-35D 35W 17.5 1.99 21.5 2.26 426×826×30 4.2
XHK-40D 40W 17.5 2.29 21.5 2.58 426×826×30 4.5
XHK-45D 45W 17.5 2.57 21.5 2.96 426×826×30 4.5
XHK-50D 50W 17.5 2.86 21.5 3.23 426×966×30 5
XHK-55D 55W 17.5 3.14 21.5 3.55 426×1104×30 5.5
XHK-60D 60W 17.5 3.43 21.5 3.88 426×1104×30 5.5
XHK-65D 65W 35.0 3.71 21.5 4.21 546×1203×35 6
XHK-65D 65W 35.0 3.71 21.5 4.21 808×822×30 6
XHK-70D 70W 35.0 3.99 21.5 4.52 546×1203×35 6
XHK-70D 70W 35.0 3.99 21.5 4.52 808×822×30 6
XHK-75D 75W 35.0 4.29 21.5 4.84 546×1203×35 8
XHK-75D 75W 35.0 4.29 21.5 4.84 808×822×30 8
XHK-80D 80W 35.0 4.57 21.5 5.17 546×1203×35 8
XHK-80D 80W 35.0 4.57 21.5 5.17 808×822×30 8
XHK-85D 85W 35.0 4.51 21.5 5.58 546×1203×35 8
XHK-85D 85W 35.0 4.51 21.5 5.58 808×822×30 8
XHK-90D 90W 35.0 5.14 21.5 5.81 546×1203×35 8
XHK-90D 90W 35.0 5.14 21.5 5.81 808×822×30 8
XHK-100D 100 35.0 2.86 43.0 3.02 808×1074×30 10
XHK-105D 105 35.0 2.99 43.0 3.16 808×1074×30 10
XHK-110D 110 35.0 3.12 43.0 3.44 808×1074×30 10
XHK-115D 115 35.0 3.25 43.0 3.56 808×1074×30 10
XHK-120D 120 35.0 3.43 43.0 3.69 808×1210×35 11
XHK-125D 125 35.0 3.57 43.0 3.85 808×1210×35 11
XHK-130D 130 35.0 3.72 43.0 4.03 808×1580×35 16
XHK-135D 135 35.0 3.86 43.0 4.19 808×1580×35 16
XHK-140D 140 35.0 4.01 43.0 4.36 808×1580×35 16
XHK-145D 145 35.0 4.14 43.0 4.53 808×1580×35 16
XHK-150D 150 35.0 4.28 43.0 4.87 808×1580×35 16
XHK-155D 160 35.0 4.43 43.0 4.91 808×1580×35 16
XHK-160D 165 35.0 4.57 43.0 5.02 808×1580×35 16
XHK-165D 170 35.0 4.72 43.0 5.19 808×1580×35 16
XHK-170D 175 35.0 4.86 43.0 5.36 808×1580×35 16
XHK-175D 180 35.0 4.99 43.0 5.53 808×1580×35 16
XHK-180D 185 35.0 5.14 43.0 5.81 808×1580×35 16

C Controller 12V/24V, automatically, time and light operated, IP66, 3 years warranty

D Battery and ABS box

E Connection Procedure

1. The operating voltage for whole system is 12V or 24V.

2. Connect the battery wire in series firstly according to the technical parameters of all components.

3. Connect the battery’s positive and negative anodes with red and black wires in themiddle of the controller.

4. Connect the positive anode (blue wire) and negative anode (brown wire) with red and black wires in the right of the controller, then the controller is in discharge condition and LED light turns on.

5. At last connect the cathode of solar panel to the blue wire of controller, wait one minute and LED light turn off, the controller into the charging status.

6. System connection finished, put the controller in the electric door.

F Installation

Preparation:

1. Select unload and assemble site. For easy transportation after assembly, the unload site should be closed to installation site.

2. Check the lamps and all accessories and if there is some damage such as collision, abrasion, deformation, scratch etc. according to shipping list. In order to avoid unnecessary damage such as scratch in installation procedure, some soft underlay must be placed under the pole components and accessories which are easy to be abrased such as solar panel, LED lamp etc. Also for easy installation of pole components, there must be an iron shelf hold the top of pole when place the components of bottom pole.

3. Check the anode and cathode marks of solar panel to ensure the correct connection. In order to prevent the wrong marks or other conditions, please test them by multimeter. Test method: use the red and black pens of digital multimeter to contact two electrodes of battery respectively, positive value means the corresponding electrode of red pen is anode, negative value means the corresponding electrode of red pen is anthode. Other test method is same to this.

Installation (Following pictures are for reference only, please make object as the standard)

1. Connect bracket and solar panel

To avoid abrasion and scratch of solar panel glass, please handle gently.

Tighten the fastening screw. Draw out the wire of solar panel from the pole.

2. Connect bracket and pole

To ensure the azimuth of solar panel be south after hoisting, please calculate the azimuth of bracket during installation.

Tighten the fastening screw after adjusting the angle.

Draw the wire of solar panel out of the pole and pull it to controller.

3. Install LED lamp

Put the lamp shell face down when install it and ensure the emitting direction of light be vertical to the ground after hoisting .

Tighten the fastening screw after adjusting the angle.

Draw the wire of lamp head out of the pole and pull it to controller..

4. Install battery

Put the battery in the battery box and mat the waterproof cushion, then connect the wire and protective casing.

5. Erect pole

Before erection, check and keep all the components are tightened, the solar panel is face to south (with compass), and the orientation of lamp is right;

During erecting, installation personnel should hold the pole and prevent the components rock and rub with the ground;

In the process of erection, adjust the lamp head to toward the road, align the base plate hole to the anchor bolts; when the base plate fall on the foundation, fix two nuts successively; then adjust the verticality of pole and ground; Tighten the nuts with spanner at last.

6. Install controller

Confirm connection location and anode & cathode marks of solar panel, LED lamp head and battery before connecting.

G Our Equipment

Packaging & Shipping

H Contacts

Daisy Zhang
Foreign Trade Salesman
Yangzhou Jinyuan Lamps Co.Ltd
Guoji Industrial Park, Yangzhou
Tel:+86 13921920906

Similar Products